How to measure your yard for a fence
A good-enough number, with a tape or with your own steps.
A fence is priced by the foot. So the one number that matters most is how long the fence line is. You don’t need it to be exact. We measure it again at the visit.
Step by step
- Sketch your yard. Draw your house and your lot on a sheet of paper, seen from above. It does not have to be neat.
- Draw the fence line. Most back yard fences start at one back corner of the house, run to the side of the lot, go around the back and come up the other side.
- Measure each straight run. Use a long tape if you have one. Write each number on your sketch.
- No tape? Use your steps. One big step is about three feet. Count your steps along each run and multiply by three.
- Add the runs up. That total is your feet of fence.
- Mark your gates. Put an X where each gate goes, and note if it is a walk gate or a wide one.

An example
Say your house sits in the middle of the lot. The fence runs 28 feet from the house to the side of the yard, 60 feet back, 100 feet across the back, 60 feet up the other side and 28 feet back to the house.
28 + 60 + 100 + 60 + 28 is 276 feet of fence, with one walk gate next to the house.
What else to note
- An old fence. If one has to come out, measure it too. Tear-out is priced by the foot.
- Rock and roots. Note any rock you can see and any trees or stumps on the line. They add cost.
- Slopes. Note where the yard drops or climbs.
- Your property line. The fence goes on your side of it. If you have a survey, find it.
Our usual minimum job is 75 feet of fence.